Product details
HobbicoFlyZone Piper J3 Cub EP RTF w/2.4GHz Radio
Item ID: HCAA2500 | Retail Price: $219.99Phil's Hobby Shop price: $179.97
Free ShippingIn stock in our warehouse
Processing: 24-48 hours
Not ready to buy just yet? Log in and save it for later:
Product description
Ask us a question about FlyZone Piper J3 Cub EP RTF w/2.4GHz Radio
This is the electric powered, radio controlled ready-to-fly
FlyZone Piper J-3 Cub Airplane with the Tactic 2.4GHz Radio.
Park Pilot Program Legal Aircraft
For beginning fliers 14 years of age and older.
FEATURES
- Construction: Foam with yellow and black painted trim scheme
- Wings: One-piece reinforced
- Radio: Tactic TTX440 4-channel 2.4GHz, with adjustable trims
- Electronic Speed Control: Tactic TSC600
- Motor: 380 size
- Landing Gear: Prebent .059" (1.5mm) thick aluminum with prebent wire tailgear
- Wheels: Foam, two main, 1.25" (32mm) diameter, one .75" (19mm) tail wheel
- Propeller: Two 7x3, one installed and one spare
- Battery: ElectriFly 7-cell 8.4V 1100mAh NiMH with Red 2-pin connector
- Charger: 12V DC Peak (GPMM7700)
- Cowl: ABS plastic
- Warranty: Hobbico guarantees this kit free from defects in both material and workmanship at the date of purchase. This warranty does not cover any component parts damaged by use or modification.
INCLUDES
- FlyZone Piper J-3 Cub Airplane with 380 size motor, two 7x3 props, 4-ch 2.4GHz radio w/3 micro servos, 4-ch receiver, ElectriFly battery and charger, electronic speed control, and illustrated instruction manual
REQUIRES: AA Batteries: Four for transmitter
SPECS
- Wingspan: 36" (915mm)
- Weight: 19-21oz (540-600g)
- Length: 25.1" (635mm)
- Center of Gravity (CG): Prebalanced at factory but should be confirmed using the following procedure;
- Place marks on bottom of wing between 1½" (38mm) and 1¾" (44mm) back from the front of the wing next to the fuselage. Lift airplane with fingertips, it should balance between the marks. If it doesn't balance within this area, weight must be added to nose or tail.
- Control Throws- Ailerons, Up and Down: 3/16" (5mm) Elevator, Up and Down: 1/2" (13mm) Rudder, Right and Left: 3/8mm (9.5mm)
- Weight in box: 2.52 kg (5.55 lb)
- Barcode: 708066025004