Product details

Traxxas
Slayer Pro 4x4 RTR with 2.4 Radio

• Replacement and upgrade parts are available for this product.

Product description

Ask us a question about Slayer Pro 4x4 RTR with 2.4 Radio

      This is the glow powered, 2.4GHz radio controlled, 1/10 scale
             Traxxas Slayer Pro 4WD Short Course Race Truck.

FEATURES

• Chassis: Titanium anodized 6061-T6 aluminum 1/8" (3mm) thick 3D semi-monocoque with integrated roll hoop and carry handle
• Drive: Four wheel
• Drive Type: Shaft driven, shafts are .71" (18mm) diameter with half shafts and rubber shielded stub axle bearings
• Engine: Traxxas .20 cu in (3.3cc) racing engine with slide valve carburetor and high flow dual stage air filter with 60% more peak horsepower than the TRX 2.5 engine, EZ-Start electric starter and 7.2V battery
• Exhaust: Polished resonator dual chamber aluminum tuned pipe
• Fuel Tank: Low profile 5.1oz (150cc) with flip top cap
• Radio: Traxxas TQ 2.4GHz pistol grip with steering and throttle sensitivity, steering and braking percentage and Traxxas Link technology that stores settings for up to 20 Traxxas Link enabled models
• Clutch: Two shoe composite construction
• Transmission: Auto shifting wide ratio two speed, forward only
• Ball Bearings: Full set included, rubber sealed bearings used in all exposed locations
• Shocks: 4 GTR inboard mounted, maintenance free, silicone oil-filled hard anodized Teflon coated bodies with TiN shafts
• Main Gear: 38 tooth, molded plastic
• Gearbox: Sealed front and rear
• Bumpers: Flexible molded front and rear tube style
• Suspension: Linkage based for long travel and precise tuning adjustments and control
• Differentials: Maintenance free, sealed with silicone X-rings and gaskets, limited slip action can be tuned using different viscosity oil
• Brakes: Alloy calipers, giant 1.6" (40mm) diameter drilled and vented steel rotor and semi-metallic friction material
• Tires: Multi terrain, soft compound rubber 1.6" (42mm) wide, 4.3" (109mm) diameter with foam inserts
• Wheels: Beadlock design 5-spoke satin chrome finish, 2.2" (56mm) diameter, 1.6" (41mm) wide
• Body: Traxxas ProGraphix pre-painted and trimmed with decals applied
• Bumpers: Front and rear, plastic construction
• Suspension: Variable progressive two rocker design, suspension travel not limited to length of shocks, ride height, suspension travel and progressive rate can be adjusted totally independent of each other, rubber sealed pivot balls can be adjusted with included tool without removing seals, steel pivot ball retaining rings
• Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
• Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when when viewed from front or behind vehicle
• Steering: Ball bearing enhanced with twin high-torque servos driving a heavy-duty servo saver
• Warranty: 30 day warranty on electronic components Chassis and engine are warranted free from defects at the date of purchase before use. No warranties are expressed or implied that cover damage caused by normal use or wear, or cover or imply how long any chassis or engine part will last before requiring replacement due to wear.

INCLUDES

• Traxxas Slayer Pro 4WD truck w/ oil-filled shocks, 3.3 engine, EZ- Start, painted body, tires, wheels, foam inserts, 2.4GHz radio w/ digital ball bearing steering servo, one standard servo, 15T clutch bell, 38T spur gear, tool set, illustrated manual, decals, two air filter elements, filter oil, engine setup DVD, long travel rocker and spring set, 7.2V battery, wall charger, extra glow plug and fuel bottle

REQUIRES

• Fuel: Traxxas 10%-20% Top Fuel
• AA Radio Batteries: 8, 4 for transmitter 4 for receiver

SPECS

• Vehicle-
• Length: 22.36" (568mm)
• Width: 11.65" (296mm)
• Height: 8.43" (214mm)
• Weight: 7.6lb (3430g)
• Wheelbase: 12.7" (323mm)
• Front and Rear Track: 11.65" (296mm) outer edges of tires
• Front and Rear Tread: 9.5" (241mm) center of tires
• Center Ground Clearance: 2.6" (67mm) Body-
• Length: 21.5" (546mm)
• Width: 9.4" (238mm) behind front wheels, narrowest point 11.4 (290mm) at rear wheels, widest point
• Height: 5.5" (139mm)

COMMENTS

• The Slayer Pro 2.4GHz is available in the following body colors; TRAD10LR Black/Red Mike Jenkins TRAD10LS Black/Silver Greg Adler TRAD10RL Red/Black Mark Jenkins TRAD10SL Silver/Black Douglas/Oberg

        All original bearings used in the Slayer Pro are rubber shielded.
        The following list includes the rubber shielded bearings and the
          non-shielded DuraTrax brand as an economical alternative.
        For Replacement Ball Bearings use:  DuraTrax         Traxxas
           Qty.   Size        Location     Qty Bearing Set   Qty Bearing Set
            2    12x18mm   Front Wheels    (1) DTXC1597      (1) TRAC5120
            2     6x12mm   Front Wheels    (1) DTXC1569      (1) TRAC5117
            2    12x18mm   Rear Wheels     (1) DTXC1597      (1) TRAC5120
            2     6x12mm   Rear Wheels     (1) DTXC1569      (1) TRAC5117
            4     5x11mm   Front Bulkhead  (2) DTXC1547      (2) TRAC5115
            4     5x11mm   Rear Bulkhead   (2) DTXC1547      (2) TRAC5115
            2     5x11mm   Rocker Arm      (1) DTXC1547      (1) TRAC5115
            1     5x11mm   Steering Arm    (1) DTXC1547      (1) TRAC5115
            1     5x8mm    Steering Arm    (1) DTXC1547      (1) TRAC5114
            1    10x15mm   Rear Diff       (1) DTXC1595      (1) TRAC5119
            2     6x12mm   Rear Diff       (1) DTXC1569      (1) TRAC5117
            1     8x16mm   Rear Diff       (1) DTXC1585      (1) TRAC5118
            2     5x11mm   Front Gearbox   (1) DTXC1547      (1) TRAC5115
            2     5x11mm   Rear Gearbox    (1) DTXC1547      (1) TRAC5115
            2     5x11mm   Primary Shaft   (1) DTXC1547      (1) TRAC5115
            1    10x15mm   Primary Shaft   (1) DTXC1595      (1) TRAC5119
            1     6x12mm   Primary Shaft   (1) DTXC1569      (1) TRAC5117
            1     5x11mm   Spur Gear/Pressure Plate (1) DTXC1547 (1) TRAC5115
            2     6x12mm   Output Shaft    (1) DTXC1569      (1) TRAC5117
            2     5x11mm   Clutch Bell     (1) DTXC1547      (1) TRAC4611

• Weight in box: 5.73 kg (12.64 lb)
• Barcode: 00000000